User`s guide

3 – Alarm Messages
Alarm Messages
3-14 PRELIMINARY 59060-00 01
0
[A1004.0027] [Eport] [Requested domain id <domain id> not available]
Meaning: The requested domain ID was rejected by the principal switch and
a different domain ID could not be assigned.
Action: Change the domain ID or disable the domain ID lock parameter to
allow dynamic reassignment of the domain ID.
[A1004.0028] [Eport] [Reinitiating link, tov value is changing.]
Meaning: Someone reconfigured a E_D_TOV or R_A_TOV. The link will be
reinitialized so the TOV is renegotiated.
Action: None
[A1004.0029] [Eport] [No Switch capable of being Principal Switch]
Meaning: An E_Port isolated because the principal priority on all switches is
set to 254.
Action: Configure one of the switches to be the principal switch by
changing the principal priority.
[A1004.002A] [Eport] [Broadcast Frame Received & broadcast disabled, not forwarding to
fabric.]
Meaning: A mix of Broadcast parameter values among switches in the fabric
compromised the integrity of the broadcast.
Action: Set the Broadcast parameter to the same value for all switches in
the fabric.
[A1004.002B] [Eport] [Port <port number> not configured for E-Port capability]
Meaning: An attempt was made by a remote switch to connect through a port
that could configure itself as an E_Port.
Action: Change the port type on the remote switch to G_Port or GL_Port.
[A1004.002C] [Eport] [Checkpoint prohibited, build fabric in progress.]
Meaning: A nondisruptive code load and activation was attempted during
fabric configuration.
Action: Wait for the fabric configuration to complete, then retry the
nondisruptive code load and activation.
[A1004.002C] [Eport] [Checkpoint prohibited, domain id assignment in progress.]
Meaning: A nondisruptive code load and activation was attempted during
fabric configuration.
Action: Wait for the fabric configuration to complete, then retry the
nondisruptive code load and activation.