User`s guide

3 – Alarm Messages
Alarm Messages
59060-00 01 PRELIMINARY 3-9
0
[A1004.0000] [Eport] [BBCredits zero, isolating]
Meaning: An ISL failed because there was a mismatch in the number of port
buffer credits between the two ports.
Action: Reconfigure the offending port so that the number interoperability
credits matches the number of buffer credits on the other switch
port.
[A1004.0001] [Eport] [Port in active hard zone, but not in installed.]
Meaning: A hard zone contains a member whose domain ID/port number
references an empty slot.
Action: None
[A1004.0003] [Eport] [Bad FSPF Header version received expected <revision> and
received <revision>, discarding frame]
Meaning: A non-compliant switch attempted to join the fabric and was
rejected.
Action: None
[A1004.0004] [Eport] [Bad checksum on LSR received on port <port num>, lsId= <domain
id>]
Meaning: A checksum failure on a Link State Record is indicated. The record
is not acknowledged and the record is re-sent by the remote
switch.
Action: None
[A1004.0005] [Eport] [Dead Hello Interval has expired for switch <domain id> on port <port
num>]
Meaning: This switch has not received a hello from the remote switch for 80
seconds. Discard routes learned via this link and renegotiate.
Action: None
[A1004.0008] [Eport] [Eport Isolating due to ELP Incompatibility]
Meaning: An E_Port isolated due to an ELP (Exchange Link Parameter)
incompatibility.
Action: Review accompanying alarms for specific cause.
[A1004.0009] [Eport] [Eport Isolating due to ESC Incompatibility]
Meaning: An E_Port isolated because the connecting switch failed to support
the standard routing protocol FSPF.
Action: Connect a compatible switch.