User`s guide

3 – Alarm Messages
Alarm Messages
3-8 PRELIMINARY 59060-00 01
0
[A1003.002E] [Zoning] [Error on zone merge (code= 0x<code>, reason= 0x<reason>)]
Meaning: The attempt to merge two fabrics failed because each active zone
set contained a zone with the same name, but different
membership.
Action: Edit the affected zone to remove the conflict or deactivate one of
the zone sets.
[A1003.003C] [Zoning] [Incompatible Zoning mode]
Meaning: The fabric contains switches with a mix of FC-SW-2 compliance
settings.
Action: Configure all switches in the fabric to have the same value for
FC-SW-2 compliance.
[A1003.003C] [Zoning] [Switch in Non-SW2 Zoning Mode & SW2 zoning command
received, Failing command]
Meaning: The fabric contains switches with a mix of FC-SW-2 compliance
settings.
Action: Configure all switches in the fabric to have the same value for
FC-SW-2 compliance.
[A1003.003C] [Zoning] [Switch in SW2 Zoning Mode & Non-SW2 merge received]
Meaning: The fabric contains switches with a mix of FC-SW-2 compliance
settings.
Action: Configure all switches in the fabric to have the same value for
FC-SW-2 compliance.
[A1003.003D] [Zoning] [Fabric lock held by domain <domain>, Checkpoint not permitted]
Meaning: A nondisruptive code load and activation was attempted while a
zone set was being activated or deactivated.
Action: Wait for the zone set activation or deactivation to complete before
attempting a nondisruptive code load and activation.
[A1003.003D] [Zoning] [Processing zoning requests, Checkpoint not permitted]
Meaning: A nondisruptive code load and activation was attempted while a
zoning changes were being made.
Action: Complete zoning changes before attempting a nondisruptive code
load and activation.
[A1003.003D] [Zoning] [Reading zoning database, Checkpoint not permitted]
Meaning: A nondisruptive code load and activation was attempted while a
zoning changes were being made.
Action: Complete zoning changes before attempting a nondisruptive code
load and activation.