User`s guide

3 – Alarm Messages
Alarm Messages
59060-00 01 PRELIMINARY 3-7
0
[A1003.001D] [Zoning] [Failing SFC, total zones in zonesets limit would be exceeded]
Meaning: The maximum number of zones in zone sets has been exceeded
on the switch as a result of a zone merge.
Action: Reduce the number zones on the remote switch.
[A1003.001F] [Zoning] [Failing SFC, member limit for zone <zone name> exceeded, (size=
<size>, limit= <limit>)]
Meaning: The maximum number of members for the given zone has been
exceeded as a result of a zone merge.
Action: Reduce the number of members in the given zone on the remote
switch.
[A1003.0020] [Zoning] [Failing SFC, total zone limit would be exceeded]
Meaning: The maximum number of zones has been exceeded on the switch
as a result of a zone merge.
Action: Reduce the number of zones on the remote switch.
[A1003.0021] [Zoning] [Failing SFC, Zoneset is empty].
Meaning: An empty zone set was included as part of a zone merge and was
rejected.
Action: Modify the zoning database on the remote switch to remove or
correct the empty zone set.
[A1003.0022] [Zoning] [Unable to update zoning DB with newly activated zoneset
information]
Meaning: Modifications were being made to the local zoning database while
a zone set was being activated or deactivated from a remote
switch.
Action: Avoid activating or deactivating a zone set while zoning changes
are being made anywhere in the fabric.
[A1003.002D] [Zoning] [Zone Merge response indicates failure to merge, Isolating link]
Meaning: The attempt to merge two fabrics failed because each active zone
set contained a zone with the same name, but different
membership.
Action: Edit the affected zone to remove the conflict or deactivate one of
the zone sets.