User`s guide

3 – Alarm Messages
Alarm Messages
3-4 PRELIMINARY 59060-00 01
0
[A1000.0017] [SM] [The switch is being shutdown while in config edit mode]
Meaning: The switch is performing an orderly shutdown before pending
changes to the switch configuration have been saved.
Action: None
[A1000.0018] [SM] [The switch is being shutdown while in zoning edit mode]
Meaning: The switch is performing an orderly shutdown before pending
zoning changes have been saved.
Action: None
[A1000.001A] [SM] [The switch is being shutdown while in manufacturing setup mode]
Meaning: The switch is performing an orderly shutdown before pending
changes to the manufacturing setup have been saved.
Action: None
[A1000.001B] [SM] [The switch is being shutdown while in snmp setup mode]
Meaning: The switch is performing an orderly shutdown before pending
changes to the SNMP configuration have been saved.
Action: None
[A1000.001C] [SM] [The switch is being shutdown while in system setup mode]
Meaning: The switch is performing an orderly shutdown before pending
changes to the system setup have been saved.
Action: None
[A1000.001D] [SM] [NDCLA failed and the switch must be reset]
Meaning: The nondisruptive code load and activation has failed and left the
switch in an indeterminate state.
Action: Reset the switch.
[A1000.001E] [SM] [The switch is being reset]
Meaning: The switch is being reset.
Action: None
[A1001.0002] [SM] [Invalid user <user> attempted to log into switch]
Meaning: A user made 5 unsuccessful attempts to log in to the switch.
Action: Assess the security risks for your fabric and take appropriate
action.
[A1003.0001] [Zoning] [Maximum of <zoneSets> inactive Zones exceeded during merge]
Meaning: The maximum number of zones has been reached.
Action: Reduce the number of zones.