User`s guide

3 – Alarm Messages
Alarm Messages
3-2 PRELIMINARY 59060-00 01
0
[A1000.0001] [SM] [Delaying switch reset - switch is busy]
Meaning: The switch is busy and cannot be reset at this time.
Action: Reset the switch again.
[A1000.0005] [SM] [The switch is being reset]
Meaning: The switch is being reset.
Action: None
[A1000.0007] [SM] [The switch is being shutdown]
Meaning: The switch is performing an orderly shutdown.
Action: None
[A1000.0009] [SM] [The switch is now performing an NDCLA]
Meaning: The switch has performed the necessary preparations and is now
completing the nondisruptive code load and activation (NDCLA) of
firmware.
Action: None
[A1000.0009] [SM] [The switch is proceeding with NDCLA]
Meaning: The switch has performed the necessary preparations and is now
completing the nondisruptive code load and activation (NDCLA) of
firmware.
Action: None
[A1000.000A] [SM] [The switch will be reset in several seconds due to a config restore]
Meaning: When a complete configuration restore is done on the switch, the
switch is reset immediately so the new configuration can take
effect.
Action: None
[A1000.000B] [SM] [The switch will be reset and POST will run in several seconds]
Meaning: The switch is being reset as a result of a command from a user
interface.
Action: None
[A1000.000B] [SM] [The switch will be reset in several seconds]
Meaning: The switch is being reset as a result of a command from a user
interface.
Action: None