Installation guide

2 – General Description
Ethernet Port
59043-01 B 2-11
Q
2.4
Ethernet Port
The Ethernet port is a RJ-45 connector located on the CPU module as shown in
Figure 2-7. This port requires a 10/100BASE-T cable and provides a connection
for a management workstation, such as a PC, a Solaris™ workstation, or a Linux®
workstation, through which to manage the switch. You can manage the switch
over an Ethernet connection using SANbox Manager, the Command Line
Interface (CLI), or SNMP.
The Ethernet port has two LEDs: a Link Status LED and an Activity LED. The Link
Status LED illuminates green to indicate that an Ethernet connection has been
established with a management workstation. The Activity LED illuminates amber
to indicate that data is being transmitted or received over the Ethernet connection.
Figure 2-7. Ethernet Port
RJ-45 Ethernet Port
Link Status LED
(Green)
Activity LED
(Amber)