Installation guide

B – Command Line Interface
Zoneset Command
59043-01 B B-81
Q
delete [zone_set]
Deletes the zone set given by [zone_set]. If the specified zone set is active, the
command is suspended until the zone set is deactivated. This keyword requires a
Zoning Edit session.
list
Displays a list of all zone sets. This keyword is available with User authority and
does not require a Zoning Edit session.
remove [zone_set] [zone_list]
Removes a list of zones given by [zone_list] from the zone set given by
[zone_set]. Zone names are delimited by spaces in [zone_list]. If [zone_set] is the
active zone set, the zone will not be removed until the zone set has been
deactivated. This keyword requires a Zoning Edit session.
rename [zone_set_old] [zone_set_new]
Renames the zone set given by [zone_set_old] to the name given by
[zone_set_new]. You can rename the active zone set. This keyword requires a
Zoning Edit session.
zones [zone_set]
Displays all zones that are members of the zone set given by [zone_set]. This
keyword is available with User authority and does not need a Zoning Edit session.
Notes  A zone set must be active for its definitions to be applied to the fabric.
 Only one zone set can be active at one time.
 A zone can be a member of more than one zone set.
Examples The following is an example of the Zoneset Active command:
SANbox2 #> zoneset active
Active ZoneSet Information
--------------------------
ActiveZoneSet Beta
LastActivatedBy Remote
LastActivatedOn Mon Apr 21 09:20:56 2003
The following is an example of the Zoneset List command:
SANbox2 #> zoneset list
Current List of ZoneSets
------------------------
alpha
beta