Installation guide

B – Command Line Interface

Set Config Command

59043-01 B B-31

switch

Initiates an editing session in which to change switch configuration settings. The

system displays each parameter one line at a time and prompts you for a value.

For each parameter, enter a new value or press the Enter key to accept the

current value shown in brackets.

Table B-8. Set Config Switch Parameters

Parameter Description

AdminState Switch administrative state: online, offline,

or diagnostics

BroadcastEnabled Enables (True) or disables (False)

forwarding of broadcast frames.

InbandEnabled Enables (True) or disables (False) the

ability to manage the switch over an ISL.

DefaultDomainID Default domain ID setting

DomainIDLock Prevents (True) or allows (False) dynamic

reassignment of the domain ID.

SymbolicName Descriptive name

R_T_TOV Receiver Transmitter Timeout Value.

Specifies the number of milliseconds a

port is to wait to receive a response from

another port. The default is 100.

R_A_TOV Resource Allocation Timeout Value. The

number of milliseconds the switch waits to

allow two ports to allocate enough

resources to establish a link. The default is

10000.

E_D_TOV Error Detect Timeout Value. The number

of milliseconds a port is to wait for errors to

clear. The default is 2000.

FS_TOV Fabric Stability Timeout Value. The default

is 5000 msec.

DS_TOV Distributed Services Timeout Value

(Management Server, Name Server). The

default is 5000 msec.