Installation guide

B – Command Line Interface
Help Command
59043-01 B B-13
Q
Help Command
Displays a brief description of the specified command and its keywords.
Authority User
Syntax help [command] [keyword]
Keywords [command]
Displays a summary of the command given by [command] and its keywords. If you
omit [command], the system displays all available commands from which to
choose.
[keyword]
Displays a summary of the keyword given by [keyword] belonging to the
command given by [command]. If you omit [keyword], the system displays the
available keywords for the specified command.
all
Displays a list of all available commands (including command variations).
Examples The following is an example of the Help Set command:
SANbox2 #> help set
set SET_OPTIONS
There are many attributes that can be set.
Type help with one of the following to get more information:
set alarm
set beacon
set blade
set config blade
set config port
set config ports
set config switch
set config threshold
set config zoning
set log
set pagebreak
set port
set setup snmp
set setup system
set switch
The following is an example of the Help Set Beacon command:
SANbox2 #> help set beacon
set beacon On | Off
This command allows the LEDs on the front of the switch to flash.
The On option will start and the Off option will stop the flashing.