User`s manual

Preliminary
Index
SANbox-8 Fibre Channel Switch
2 Index 59008-03 Rev. A Installer’s/User’s Manual
multistage 5-19
E
emissions standards A-5
enclosure types A-4
environmental specifications A-4
error codes
Arbitrated Loop Test Failure (13 Blinks) 3-7
Complete Failure 3-8
Ethernet Port Failure (4 blinks) 3-5
Ethernet Port Tests Good (3 blinks) 3-5
Force PROM Mode in Effect (5 Blinks) 3-5
GBIC Bypass Test Failure (7 Blinks) 3-6
Hung Flash Control Code 3-8
NVRAM Test Failure (15 Blinks) 3-8
Port Loop-back Test Failure (8 blinks) 3-6
PROM Checksum Failure (1 blink) 3-5
RAM Failure (2 blinks) 3-5
Switch ASIC Test Failure (6 Blinks) 3-6
Switch Auto-Route Test Failure (10 Blinks) 3-7
Switch Bus Test Failure (9 Blinks) 3-7
Switch Management Port Failure (14 Blinks) 3-8
Ethernet
Activity LED 1-22
configuration 2-16
connector 1-10, A-3
LINK Status LED 1-22
F
F_Port
configuration 2-17
description 1-2
fabric
aggregate bandwidth A-3
component 1-1
latency A-3
management 1-11, A-3
point-to-point bandwidth A-3
Fabric Loop Port - See FL_Port.
Fabric Port
configuration 2-17
description 1-2
overview 1-3
fabric size
cascade 5-12
mesh 5-15
multistage 5-18
Fan Fail LED 1-20
FC-PLDA - See Fibre Channel-Private Loop SCSI Direct
Attach
fiber optic connection
description 2-10
T_Port 5-23
Fibre Channel Port Loop-back Test Failure 3-6
fibre channel ports 1-17
Fibre Channel-Private Loop SCSI Direct Attach standard
1-4
Field Replaceable Unit 1-8
FL_Port
configuration 2-17
description 1-2
forced to operate as F_Port 2-7
Flash Checksum Failure/Ethernet Port Failure 3-5
Flash Checksum Failure/Ethernet Port Good 3-5
Force PROM Mode in Effect 3-5
frame
limit tuning 2-19
size 1-2, A-3
front panel
controls 1-19
LEDs 1-20
FRU - See Field Replaceable Unit.
fuse
part number A-4
removal 4-2
replacement 4-3
type A-4
G
GBIC - See GigaBit Interface Converter
GBIC Bypass Port Loopback Test Failure 3-6
GigaBit Interface Converter
copper inter-enclosure specifications A-6
copper intra-enclosure specifications A-7
hot-pluggable 2-10
installation 2-4
longwave laser specifications A-6
population 1-3
removal 4-4
replacement 4-5
shortwave laser specifications A-5
types certified 1-18
H
hard zone 1-12, 2-20
hardware support B-1
harmonics A-5
Heartbeat LED
description 1-20
failure blink patterns 3-4
normal operation 3-4
heat output A-4
help desk B-1
host-bus-adapter 2-19
humidity A-4
Hung Flash Control Code 3-8