User`s guide

7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
7-16 FI0054601-00 C
S
 NTP Server 2 – Displays the IP address of the second NTP server to be
queried by the router when setting its time and date. This server is used only
if the first NTP server did not respond.
 NTP Server 3 – Displays the IP address of the third NTP server to be
queried by the router when setting its time and date. This server is used only
if the first and second NTP servers did not respond.
 NTP Server 4 – Displays the IP address of the fourth NTP server to be
queried by the router when setting its time and date. This server is used only
if the first, second, and third NTP servers did not respond.
 Set NTP Address – After enabling NTP Servers and setting their IP
addresses, click this button saves any changes made to the NTP server IP
addresses.
Security
Figure 7-16 Security Vertical Tab
The Security tab enables you to set the router’s password. The Security tab
provides the following parameters:
 Current Password – You must enter the current password before changing
it.
 New Password – Enter the new router password.
 Verify New Password – Verify the password entered in the New Password
field.
 Apply – Click this button to save the password changes.
 Clear Fields – Click this button to clear the Current Password, New
Password, and Verify Password fields.