User`s guide

7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
7-12 FI0054601-00 C
S
SANbox 6142 Router
The top of the router tree displays the router system configuration and status. It
contains the following tabs:
 Information Tab (see page 7-12)
 SNMP Management Tab (see page 7-17)
 Features Tab (see page 7-19)
 Assigned Remote Router Tab (see page 7-19)
 Topology Tab (see page 7-20)
Information Tab
The Information tab provides four vertical tabs with icons that identify its content:
Basic Information, Management Information, and NTP Server Information, and
Security. It also contains three buttons: Reboot, FW Load, and Restore Defaults.
Basic Information
Figure 7-13 Basic Information Vertical Tab
The Basic Information tab provides the following parameters:
 Product Name – Identifies the router model.
 Symbolic Name – Lets you to assign a symbolic name to the router.
 Serial Number – Displays the router’s serial number.
NOTE:
If your router’s configuration includes a remote router, the router
configuration window includes a tab with the basic information for that router,
as shown in the following example for Assigned Remote Router:1. You can
define additional remote routers using the Add Remote Peer wizard.