User`s guide

4 – Installation
SANbox 6142 Router Installation
4-2 FI0054601-00 C
S
Power Requirements
Power requirements for the SANbox 6142 router are 0.5 Amps at 100-125 VAC,
50 Hz to 60 Hz or 0.25 Amps at 200-240 VAC, 50 Hz to 60 Hz.
Environmental Conditions
Consider the factors that affect the climate in your facility, such as equipment heat
dissipation and ventilation. The router requires the following operating conditions:
 Operating temperature range – 5–40
°C (41–104°F)
 Relative humidity – 15–90 percent, non-condensing
SANbox 6142 Router Installation
Prior to installing the router, unpack the router and accessories. The SANbox
6142 router is shipped with the following components, shown in Figure 4-1:
 Power cord.
 Adapter (RJ45 to DB9F) for connecting the router’s serial port to a
workstation used for configuring and managing the router. A standard Cat5
Ethernet cable is required (not supplied) to connect the adapter to the router.
The adapter connects directly to the workstation’s serial (COM) port.
Processor 500 MHz or faster
Hardware CD-ROM drive, RJ-45 Ethernet port, RS-232
serial port (optional)
Internet browser
One of the following:
 Microsoft Internet Explorer 5.0 and later
 Netscape Navigator® 4.72 and later
 Mozilla® 1.02 and later
 Safari™
 Java 2 runtime environment to support the web
applet
Table 4-1. Management Workstation Requirements
Item Description