User`s guide

2 – General Description
Remote SAN Island Connectivity
FI0054601-00 C 2-5
A
To map remote FC devices to local SAN:
1. If the remote router is not already associated with a local router, use either
the SANsurfer Add Remote Router wizard (see page 7-68) or the CLI
command remotepeer add (see page A-32) to associate the two routers
with each other.
2. Use the SANsurfer Map Remote Initiator/Target wizard (see page 7-75) or
the CLI remotemap add command (see page A-28) to create the initiator to
target mapping.
Figure 2-3 Local SAN Island Connectivity
The SANbox 6142 Intelligent Router supports inter-connecting local FC SAN
islands. It also supports bridging iSCSI devices on the LAN to FC devices on the
SAN (see Figure 2-33). It provides:
 FC storage from one SAN to a FC server on different SAN.
 FC storage to iSCSI servers.
 SCSI storage to FC servers.