User`s guide

B – Log Messages
Fatal Log Messages
B-28 FI0054601-00 C
S
FC Driver
The following fatal log messages are common to both Fibre Channel ports, 1
(FC1) and 2 (FC2). They are listed in Table B-14 and described following the
table. Log messages beginning with #0 denote fibre channel port 1 (FC1). Log
messages beginning with #1 denote fibre channel port 2 (FC2).
Table B-14. Fibre Channel Driver—Fatal Log Messages
ID Log Message No.
102419 #%d: qlutm_init: Diagnostic failed, port 1 invalid SRAM 19
102420 #%d: qlutm_init: Diagnostic failed, port 1 POST failed 20
102421 #%d: qlutm_init: Diagnostic failed, port 2 invalid SRAM 21
102422 #%d: qlutm_init: Diagnostic failed, port 2 POST failed 22
102423 #%d: qlutm_init: Failed to return diagnostic result to Bridge 23
102656 #%d: QLInitializeAdapter: Reset ISP failed 256
102657 #%d: QLInitializeAdapter: Load RISC code failed 257
102658 #%d: QLInitializeAdapter: Load ISP2322 receive sequencer code
failed
258
102659 #%d: QLInitializeAdapter: Load ISP2322 transmit sequencer
code failed
259
102662 #%d: QLInitializeAdapter: Verify Checksum command failed (%x) 262
102680 #%d: QLInitializeFW: FAILED 280
102688 #%d: QLInterruptServiceRoutine: Risc pause %x with parity error
hccr %x, Disable adapter
288
102689 #%d: QLInterruptServiceRoutine: Invalid interrupt status: %x 289
10691 #%d: QLFcipInterruptServiceRoutine: Risc pause %x with parity
error hccr %x, Disable adapter
291
10692 #%d: QLFcipInterruptServiceRoutine: Invalid interrupt status: %x 292
102716 #%d: QLIsrEventHandler: System error event (%x), MB1=%x,
MB2=%x, MB3=%x, MB4=%x, MB5=%x, MB6=%x, MB7=%x
316
102746 #%d: QLProcessResponseQueue: Invalid handle %x, type %x 346
102747 #%d: QLProcessResponseQueueFS: Invalid buffer type: %x 347
102748 #%d: QLProcessResponseQueueFS: Invalid EntryType (0x%x) 348