User`s guide

A – Command Reference
Commands
A-46 FI0054601-00 C
S
Set NTP Command
Use the set NTP command to configure the network time protocol parameters.
NTP sets the date and time on the router from a network time server.
Authority Admin session
Syntax set ntp
Examples Set NTP command example:
QRouter (admin) #> set ntp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
NTP (0=Enable, 1=Disable) [Enabled ]
TimeZone Offset from GMT (Min=-12hrs,Max=12hrs) [-8 ]
IP Address [0] [0.0.0.0 ] 207.126.97.57
IP Address [1] [0.0.0.0 ]
IP Address [2] [0.0.0.0 ]
All attribute values that have been changed will now be saved.