User`s guide

A – Command Reference
Commands
A-32 FI0054601-00 C
S
Remote Peer Command
The remotepeer command lets you assign a router peer to a local router, which
can have up to four peers.
Authority Admin session
Syntax remotepeer
add
rm
Keywords add
Add a peer router.
rm
Remove a peer router.
Examples Remotepeer add command example:
QRouter (admin) #> remotepeer add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
REMOTE MGMT port IP Address [0.0.0.0] 172.17.137.143
Contacting REMOTE system (timeout=120 seconds) ...
<Admin> password of REMOTE system: ******
<Admin> password confirmed.
Remote System Information
-------------------------
Product Name iSR-6142
Symbolic Name
Serial Number 0608A00471
HW Version 3
SW Version 2.3.0.1
No. of iSCSI Ports 2
iSCSI Base Name iqn.2004-08.com.qlogic:isr-6142.0608a00471
Mgmt IP Address 172.17.137.143
iSCSI Port 1 IP Address 10.3.5.106
iSCSI Port 1 TCP Port No. 3260
iSCSI Port 2 IP Address 10.3.5.107
iSCSI Port 2 TCP Port No. 3260
Do you wish to create a connection with the REMOTE system (y/n): y
All attribute values for that have been changed will now be saved.