User`s guide

Table Of Contents
7 – SANsurfer iSCSI/FC Router Manager
Wizards
FI0054601-00 C 7-55
A
6. Complete the wizard:
a. If you want to reboot the system now, click Yes. Otherwise, click No.
b. Click Finish.
Map Local Initiator/Target Wizard
The Map Local Initiator/Target Wizard provides a set of dialog boxes that walk you
through the steps required for mapping a local initiator to a local target.
You can start this wizard at any time by selecting Map Local Initiator/Target
Wizard from the Wizards Menu or from the Action Menu.
When the Map Local Initiator/Target wizard launches, the Select an Initiator
dialog box displays a list of locally connected initiators (FC or iSCSI), as shown in
Figure 7-50.
Figure 7-50 Initiator Selection Dialog Box
To map a local target to a local initiator:
1. Select the check box next to the initiator you want to map, then click Next.
NOTE:
The new firmware will not take effect until the system is rebooted.