User`s guide

7 – SANsurfer iSCSI/FC Router Manager
Wizards
FI0054601-00 C 7-45
A
Figure 7-36 iSCSI Port Connection Settings Panel Dialog Box
2. To configure the iSCSI Port IPV4 settings:
a. Type the information in the following fields.
 IP Address
 Subnet Mask
 Gateway
b. If desired, configure the IP address of the iSNS server with which the
router registers the selected iSCSI port:
 Select the Enable iSNS check box to make the Server IP
address field editable.
 Enter the IP address of the iSNS server in the Server IP address
field.
3. Click Next. The iSCSI Port IPv6 Settings Panel appears, as shown in
Figure 7-37.