User`s guide

7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
7-22 FI0054601-00 C
S
 Frame Size – Displays a drop-down list that lets you set the frame size:
2048, 1024, or 512 bytes. The default is 2048. If you change this setting, you
must click Save (at the bottom of the page) for the change to take effect.
 Execution Throttle – Displays a drop-down list that lets you set the
execution throttle: 16, 32, 64, 128, or 256. The default is 64. When you
change this setting, you must click Save (at the bottom of the page) for the
change to take effect.
FC Port Performance Tab
When you select the Performance tab for the selected FC port, the system
displays the Performance tabbed page (see Figure 7-22).
Figure 7-22 FC Port Performance Tab
The FC Port Performance tab displays the following information:
 Initiator Read – Shows the initiator’s read performance through the
selected FC port.
 Initiator Write – Shows the initiator’s write performance through the
selected FC port.
 Target Read – Shows the target’s read performance through the selected
FC port.