User guide

70 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide September 2008
CIM (Common Interface Model) — allows management of the switch through
third-party applications that use CIM.
FTP (File Transfer Protocol) — allows file transfers to the switch via FTP. FTP is
required for out-of-band firmware uploads which will complete faster than in-
band Firmware uploads.
Management Server — allows management of the switch through third-party
applications that use GS-3 Management Server.
Call Home — allows users to configure their switches to send alerts and events to
pagers, and Email. Users can configure the type of events and where the alerts are
sent.
Configuring the Network
Network configuration includes the following elements:
Network IP Configuration
IPv4 and IPv6 Addressing
Network DNS (Domain Name Service) Configuration
Network Properties
Use the Network Properties dialogs (FIGURE 3-10) to configure IP and DNS
parameters. The Network Properties dialog has two tabs: IP and DNS. Click the IP
tab to open the Network Properties IP dialog. Click the DNS tab to open the
Network Properties DNS dialog. After making changes, click the OK button to put
the new values into effect.
To open the Network Properties dialog, choose one of the following:
Open the faceplate display for the switch you be configuring. Open the Switch
menu and select Network Properties.
Right-click a switch graphic in the faceplate display, and select Network
Properties from the popup menu.