User guide

54 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide • September 2008
CIM Enabled Common Interface Model status. The CIM agent is
based on the SNIA Storage Management Initiative
Specification (SMI-S), which is the standard for SAN
management in a heterogeneous environment.
FTP Enabled FTP status
Management Server Enabled Management server status.
SNMP Enabled SNMP enabled or disabled.
Call Home Enabled Call Home status. If enabled and configured, switches
can send alerts and events to pagers, and send Email.
Users can configure the type of events and where the
alerts are sent.
Zones/Security Group
Merge Auto Save If enabled, any zoning updates from the fabric will be
saved in permanent (non-volatile) memory as well as
temporary memory. If disabled, any zoning updates
from the fabric will be saved only in temporary
memory and will be lost after a switch reset.
Zoning Default Visibility N/A - does not apply to this switch
Default Zone Disables communication between ports and devices not
defined in the active zone set, or when there is no active
zone set.
Discard Inactive Automatically removes the previously active zone set
when a zone set is activated on a switch.
Implicit Hard Zoning Introduces hardware enforcement of zoning regardless
of type. All zones and all supported zone member types
will have hardware enforcement.
Security Auto Save N/A - does not apply to this switch
Security Fabric Binding Enable N/A - does not apply to this switch
Advanced Group
R_A_TOV Resource allocation timeout value
E_D_TOV Error detect timeout value
Number of Donor Groups Total number of donor port groups. A donor group is a
set of ports on a switch that can donate buffer credits to
each other.
TABLE 3-1 Switch Data Window Entries (Continued)
Entry Description