User guide

Chapter 3 Managing Switches 53
User Login Group
User Name Account name
Login Level Authority level
Super User Super user privileges enabled/disabled
UserAuthentication Enabled Enforcement of account names and authority (always
True)
Firmware Group
Firmware Version Active firmware version
Inactive Firmware Version This field does not apply to this switch
Pending Firmware Version Firmware version that will be activated at the next reset
PROM/Flasher Version PROM firmware version
Services Group
NTP Client Enabled Enabled or disabled. Allows for switches to
synchronize their time to a centralized server.
NTP Server Address The IP address of the centralized NTP server. Ethernet
connection to NTP server is required.
FDMI Enable Fabric Device Management Interface status. If enabled,
device information can be obtained, managed, and
saved through the fabric using Name Service
Management Server functions. QuickTools will report
all FDMI information reported by the entry switch, if
FDMI is enabled on the entry switch.
FDMI HBA Entry Limit Maximum number of HBAs that can be registered with
a switch.
Embedded GUI Enabled QuickTools web applet status. Enables or disables the
web applet on the switch.
Inactivity Timeout Number of minutes the switch waits before terminating
an idle command line interface session. Zero (0)
disables the time out threshold.
GUI Mgmt Enabled Out-of-band management application status. If
disabled, the switch cannot be managed out-of-band
using applications such as Enterprise Fabric Suite 2007
or QuickTools.
Telnet Enabled Telnet client status
SSH Enabled Secure Shell status. If enabled, an encrypted data path
is provided for command line interface sessions.
SSL Enabled Secure Sockets Layer status. If enabled, encryption for
switch management web applet and CIM sessions is
provided.
TABLE 3-1 Switch Data Window Entries (Continued)
Entry Description