User guide

42 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide • September 2008
1. In the faceplate display, open the Zoning menu and select Edit Zoning to open
the Edit Zoning dialog.
2. In the zone set tree, select the zone to copy and click the Copy button.
3. Select the destination zone set, and click the Paste button.
4. Click the Apply button to display the Save Zoning & Error Check dialog.
5. Click the Perform Error Check button to have the application check for zoning
conflicts, such as empty zones, aliases, or zone sets.
6. Click the Save Zoning button to implement the changes.
7. Click the Close button to close the Error Check dialog.
Adding Zone Members
You can zone a port/device by switch domain ID and port number, device port Fibre
Channel address, or the device port WWN. Adding a port/device to a zone affects
every zone set in which that zone is a member. To add ports/devices to a zone, do
the following:
1. Open the Zoning menu, and select Edit Zoning to open the Edit Zoning dialog.
2. Choose one of the following methods to add the port/device:
■ Select a port/device in the Port/Device tree, and drag it into the zone. To select
multiple ports/devices, press the Control key while selecting.
■ Select a port/device in the Port/Device tree. To select multiple ports/devices,
press the Control key while selecting. Select a zone set in the left pane. Open
the Edit menu and select Add Members.
■ Select a port/device in the Port/Device tree. To select multiple ports/devices,
press the Control key while selecting. Select a zone set in the left pane. Click
the Insert button.
If the port/device you want to add is not in the Port/Device tree, you can add it
by doing the following:
a. Right-click the selected zone.
b. Open the Edit menu and select Create Members.
c. Select the WWN, Domain/Port, or First Port Address option.
d. Enter the hexadecimal value for the port/device according to the option
selected: 16 digits for a WWN member, 4 digits for a Domain/ Port member
(DDPP), or a 6-digit Fibre Channel Address for a First Port Address member
(DDPPAA) where D=domain ID, P=port number, and A=ALPA.