User guide

Chapter 2 Managing Fabrics 31
■ MaxTotalMembers is 10,000. The maximum number of zone and alias members
(10000) that can be stored in the switch’s zoning database. Each instance of a zone
member or alias member counts toward this maximum.
■ MaxZonesInZoneSets is 2000. The maximum number of zone linkages to
zonesets that can be configured on the switch. Every time a zone is added to a
zoneset this constitutes a linkage.
■ MaxMembersPerZone is 2000. The maximum number of zone members that can
be added to any zone on the switch. Aliases are considered zone members when
added to a zone.
■ MaxMembersPerAlias is 2000. The maximum number of zone members that can
be added to any alias on the switch.
To view zoning properties and limits on a switch, do the following:
1. On the faceplate display, open the Zoning menu and select Edit Zoning to open
the Edit Zoning dialog.
2. Choose one of the following:
■ The zoning properties/limits are displayed under the zoning tool bar
(
FIGURE 2-6).
■ In the zone sets tree (left windowpane), right-click the Zone Sets at the very
top, and select Properties.
■ In the zone set tree (left windowpane), select the Zone Sets entry at the very
top, open the Edit menu, and select Properties.
3. View the zoning properties information in the Properties dialog.
4. Click the OK button to close the Properties dialog.
Managing the Zoning Database
Managing the zoning database consists of the following:
■ Editing the Zoning Database
■ Resolving Zoning
■ Configuring the Zoning Database
■ Saving the Zoning Database to a File
■ Restoring the Zoning Database from a File
■ Restoring the Default Zoning Database
■ Removing All Zoning Definitions