User guide

14 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide September 2008
you disable in-band management on a particular switch, you can no longer
communicate with that switch by means other than a direct Ethernet or serial
connection. Refer to Enabling In-band Management for more information.
Enabling SNMP Configuration
To enable SNMP configuration, do the following:
1. Open the Switch menu and select SNMP Properties to open the SNMP
Properties dialog.
2. In the SNMP Configuration area, select the SNMP Enabled option.
3. Click the OK button to save the change to the database.
Enabling In-band Management
To enable In-band Management, do the following:
1. Open the Switch menu and select Switch Properties to open the Switch
Properties dialog.
2. Click the In-band Management Enable option.
3. Click the OK button to save the change to the database.
Rediscovering a Fabric
After making changes to or deleting switches from a fabric view, it may be helpful to
again view the actual fabric configuration. The rediscover fabric option clears out the
current fabric information being displayed, and rediscovers all switch information.
To rediscover a fabric, open the Fabric menu, and select Rediscover Fabric. The
rediscover function is more comprehensive than the refresh function.