User guide

112 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide • September 2008
FIGURE 4-4 Port Properties Dialog
Note – Use the Select to Propagate Changes to Entire Column options to propagate
the same change to all selected ports, select the options before making a change to a
port.
The Port Properties dialog entries are listed in
TABLE 4-3.
TABLE 4-3 Port Properties Dialog Entries
State Description
Port The current port name
Symbolic Name To change, click in the field and enter the new port symbolic name.
Port WWN The world wide name of the port.
Operational State The port state that is currently active. This value may be different
from the administrative port state, for example due to an error
condition.
Configured State The port state (Online, Offline, Diagnostics, or Down) saved in the
switch configuration, either by the user or at the factory. This value
is persistent; it will be maintained during a switch reset, and will
be used after a reset to set the port operational state.
Operational Speed The port speed that is currently active.
Configured Speed The port speed saved in the switch configuration.
Running Type The port type that is currently active.
Configured Type The port type saved in the switch configuration. To change, click in
the field and select an option from the drop-down list.