User guide

108 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide • September 2008
FIGURE 4-3 Port Statistics Data Window
The Statistics drop-down list is available on the Port Statistics data window, and
provides different ways to view detailed port information. Click the down arrow to
open the drop-down list. Open the drop-down list and select Absolute to view the
total count of statistics since the last switch or port reset. Select Rate to view the
number of statistics counted per second over the polling period. Select Baseline to
view the total count of statistics since the last time the baseline was set. When
viewing baseline statistics, click the Clear Baseline button to set the current baseline.
The baseline will also be set when the switch status changes from unreachable to
reachable.
TABLE 4-2 describes the Port Statistics data window entries.
TABLE 4-2 Port Statistics Data Window Entries
Entry Description
Start Time The beginning of the period over which the statistics apply. The
start time for the Absolute view is not applicable. The start time
for the Rate view is the beginning of polling interval. The start
time for the Baseline view is the last time the baseline was set.
End Time The last time the statistics were updated on the display.
Total Time Total time period from start time to end time.
Al Init Number of times the port entered the initialization state.