User guide

106 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide September 2008
Configured Administrative Port State The port state (Online, Offline, Diagnostics, or
Down) which is saved in the switch
configuration, either by the user or at the
factory. This value is persistent; it will be
maintained during a switch reset, and will be
used after a reset to set the port operational
state.
Logged In Indicates whether logged in or not.
Port Connection Status E_Port connection status. Status can be None,
Connecting, Connected or Isolated.
Reason of Status Why E_Port is isolated.
Administrative Port Speed The speed requested by the user.
Operational Port Speed The speed actually being used by the port.
Port Speed Supported The speeds supported by the port
Symbolic Name Port symbolic name
POST Status Status from the most recent Power On Self
Test
POST Fault Code Fault code from the most recent Power On Self
Test
Test Status Status from the most recent port test
Test Fault Code Fault code from the most recent port test
Advanced Group
MFS Mode Multiple Frame Sequence bundling status.
Configured I/O Stream Guard The requested RSCN message suppression
status by the user. Status can be enabled,
disabled, or automatically determined by the
switch.
Operational I/O Stream Guard The actual RSCN message suppression status.
Status can be enabled, disabled, or
automatically determined by the switch.
Device Scan Device scan status. Enabled means the switch
queries the connected device during login for
FC-4 descriptor information.
Auto Performance Tuning Enables the switch to dynamically control the
MFS_Enable, VI_Enable and LCF_Enable
features based on the operational state of the
port.
AL Fairness Controls how frequently the switch can
arbitrate for access. Applies only affects ports
running in loop (FL) mode.
Port Binding N/A - does not apply to this switch
TABLE 4-1 Port Information Data Window Entries (Continued)
Entry Description