User guide

92 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide • September 2008
FIGURE 3-19 Call Home Setup Dialog
TABLE 3-11 lists the entries in the Call Home Setup dialog.
TABLE 3-11 Call Home Setup Entries
Entry Description
Primary SMTP: (active) The "(active)" indicates the Primary SMTP (Simple Mail
Transfer Protocol) is the SMTP server that CallHome is
going to try to use when transmitting Email messages.
CallHome operates as an SMTP client, or more correctly,
and SMTP sending agent.
After any system configuration, the Primary SMTP server
will always become the active SMTP, provided it is enabled
and has a non-default address defined (0.0.0.0 is the
default).
Primary SMTP Server Address: This is the IP address of the primary (first) SMTP server.
Primary SMTP Server Port: This is the service port number that the primary SMTP
server is listening on to accept connections from SMTP
sending agents.
Secondary SMTP: The Secondary SMTP is the second SMTP server. If the
primary SMTP is not enabled/defined, or if there was a
failure in communicating with the primary SMTP server, the
Secondary SMTP server will become the (active) SMTP
server - the one used by Call Home for the next attempt to
transmit Email.