User guide

84 Sun Storage Fibre Channel Switch 5802 QuickTools User Guide • September 2008
■ Nicknames — restores the last saved nickname configuration.
■ Call Home — restores all Call Home configuration and profiles settings.
5. If you select the Configured Zoning option on the Selective Restore tab page or
perform a Full Restore and the file contains zone sets, a dialog prompts you to
activate one of those zone sets. Click the Yes button, and select a zone set from
the drop-down list in the Select Zone Set to be Activated dialog.
6. Click the OK button and view the results in the top pane of the Restore dialog.
Testing a Switch
The Switch Diagnostics dialog (FIGURE 3-15) allows you to test and verify operational
status of switches (online and other states). To open the Switch Diagnostic dialogs,
open the Switch menu, select Switch Diagnostics, and select Online Switch
Diagnostics or Offline Switch Diagnostics. Only one switch can be tested at a time
for each type of test.
The diagnostic tests are:
■ Online — a non-disruptive test that exercises port-to-device connections for all
ports on a switch that are online.
■ Offline — a disruptive test that exercises all port connections for a switch in the
diagnostics state. You must place the switch in the diagnostics before starting the
test.
■ Connectivity — is a disruptive test that exercises all port and inter-port
connections for a switch in the diagnostics state.You must place the switch in the
diagnostics state before starting the test. The two types of connectivity tests are
internal loopback and external loopback.