Installation guide

4 – Installation
Install Firmware
4-24 59096-00 A
0
2. Enter your account name on the remote host and the IP address of the
remote host. When prompted for the source file name, enter the path for the
firmware image file.
User Account : johndoe
IP Address : 10.20.20.200
Source Filename : 4.0.2.00.04_mpc
3. When prompted to install the new firmware, enter Yes to continue or No to
cancel. If possible, a non-disruptive activation will be performed. This is the
last opportunity to cancel.
About to install image. Do you want to continue? [y/n] y
Connected to 10.20.20.200 (10.20.20.200).
220 localhost.localdomain FTP server (Version
wu-2.6.1-18) ready.
4. Enter the password for your account name. The firmware will now be
downloaded from the remote host to the switch, installed, and activated.
331 Password required for johndoe.
Password:******
230 User johndoe logged in.