Installation guide

59096-06 A 1-1
1 Introduction
This manual describes the features and installation of the SANbox
®
5600 Series
Fibre Channel switch, firmware version 7.4. The SANbox 5600 and 5602 switches
are 20-port, 4-Gbps Fibre Channel switches. The 5600 has a single power supply;
the 5602 has dual, replaceable power supplies.
This manual is organized as follows:
 Section 1 describes the intended audience, related materials, safety notices,
communications statements, laser safety information, electrostatic discharge
sensitivity precautions, accessible parts, general program license, and
technical support.
 Section 2 is an overview of the switch. It describes indicator LEDs and all
user controls and connections.
 Section 3 describes the factors to consider when planning a fabric.
 Section 4 explains how to install and configure the switch.
 Section 5 describes the diagnostic methods and troubleshooting
procedures.
 Section 6 describes the removal and replacement of field replaceable units.
This includes media transceivers for all models and power supplies for
switch model 5602.
 Appendix A lists the switch specifications.
Please read the communications statements and laser safety information later in
this section.
Intended Audience
This manual introduces users to the switch and explains its installation and
service. It is intended for users who are responsible for installing and servicing
network equipment.