Installation guide

4 – Installation
Installing a Switch
59096-06 A 4-3
A
Installing a Switch
Unpack the switch and accessories. The SANbox 5600 Series product is shipped
with the components shown in Figure 4-1:
 SANbox 5600 Series Fibre Channel (1) with firmware installed
 Power cord (1) – model 5600
 Power cords (2) – model 5602
 Rubber feet (4)
 Mounting brackets (2) – model 5600
 CD-ROM containing Enterprise Fabric Suite 2007 switch management
application, release notes, and documentation.
Figure 4-1 SANbox 5600 Series Fibre Channel Switch
Installing a SANbox 5600 Series switch involves the following steps:
1. Mount the Switch
2. Install Transceivers
3. Configure the Workstation
4. Connect the Switch to AC Power
5. Connect the Workstation to the Switch
6. Configure the Switch
7. Cable Devices to the Switch
L
AL A
LAL
ALA
L
A
L
A
LA
0
1
2
3
4
5
67
L
A
LAL AL
ALA
L
A
L
A
L
A
16
L
A
17
L
A
18
L
A
19
L
A
L
AL A L AL
ALA
L
A
L
A
LA
0
1
2
3
4
5
67
L
AL A L AL
A
LA
L
A
L
A
LA
16
L
A
17
L
A
18
L
A
19
L
A
Model 5600 Model 5602