Installation guide

59096-02 C Page v
SANbox 5600 Series Fibre Channel Switch
Installation Guide
A
3.7 Fabric Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
3.7.1 Connection Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
3.7.2 Device Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
3.7.2.1 Security Example: Switches and HBAs . . . . . . . . . . . . . . . . . . . 3-17
3.7.2.2 Security Example: RADIUS Server. . . . . . . . . . . . . . . . . . . . . . . 3-20
3.7.2.3 Security Example: Host Authentication . . . . . . . . . . . . . . . . . . . 3-23
3.7.3 User Account Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
3.8 Fabric Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Section 4 Installation
4.1 Site Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.1.1 Fabric Management Workstation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.1.2 Switch Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4.1.3 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4.2 Installing a Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4.2.1 Mount the Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
4.2.2 Install Transceivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
4.2.3 Connect the Workstation to the Switch . . . . . . . . . . . . . . . . . . . . . . . . 4-8
4.2.4 Configure the Workstation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
4.2.4.1 Setting the Workstation IP Address for Ethernet Connections . . 4-9
4.2.4.2 Configuring the Workstation Serial Port . . . . . . . . . . . . . . . . . . . 4-10
4.2.5 Install the Management Application. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
4.2.5.1 SANsurfer Switch Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
4.2.5.2 SANsurfer Management Suite . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
4.2.6 Start SANsurfer Switch Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
4.2.7 Connect the Switch to AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
4.2.8 Configure the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
4.2.9 Cable Devices to the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
4.3 Install Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
4.3.1 Using SANsurfer Switch Manager to Install Firmware. . . . . . . . . . . . . 4-26
4.3.2 Using the CLI to Install Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27
4.4 Upgrading the SANbox 5600 Series Switch. . . . . . . . . . . . . . . . . . . . . . . . . 4-28
Section 5 Diagnostics/Troubleshooting
5.1 Chassis Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5.1.1 Input Power LED Is Extinguished . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5.1.2 System Fault LED Is Illuminated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5.2 Power-On Self Test Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3