Installation guide

59096-02 C Index-3
SANbox 5600 Series Fibre Channel Switch
Installation Guide
A
event logging
by component B-76, B-111
by port B-78, B-113
by severity level B-113
display B-111
restore defaults B-78
save settings B-79
settings B-113
severity level B-78
start B-79
stop B-79
extended credits 3-4
external test B-123
F
F_Port 2-7
fabric
management 3-27, A-3
management switch 2-8
management workstation 4-1
point-to-point bandwidth A-2
port 2-7
security 3-14
Fabric Device Management Interface B-94
factory defaults 5-14, B-46
Feature command B-24
fiber optic cable 3-1
Fibre Channel
ports 2-5
protocols A-1
Field Replaceable Unit 6-1, A-3
File Transfer Protocol
description 2-12
example 5-5, B-39
service 3-14, B-85
firmware
failure 5-4
image file B-38
install with CLI 4-27, B-25
install with SANsurfer Switch Manager 4-26
list image files B-38
non-disruptive activation 4-25, B-37
remove image files B-38
retrieve image file B-38
unpack image 5-13, B-38
version B-99
Firmware Install command B-25
FL_Port 2-7
flash memory 2-3
four-switch stacking 3-9
frame size A-2
FRU - See Field Replaceable Unit
FTP - See File Transfer Protocol
G
G_Port 2-7
gateway address B-87
GBIC - See GigaBit Interface Converter
generic ports 2-7
Gigabit Interface Converter 3-1
GL_Port 2-7
group
add member B-27
copy B-29
create B-29
edit member attributes B-30
list B-31
list members B-31
Management Server B-29
remove member B-31
rename B-31
type B-29, B-31
Group command B-26