Installation guide

4
Step 8. Log In to the Switch
You can log in to and manage the switch using the command line interface, the QuickTools web applet, or the optional
workstation-based application, Enterprise Fabric Suite 2007™. This guide will describe the use of QuickTools. For more
information about using Enterprise Fabric Suite 2007 under the 30-day trial license, see the SANbox 5000 Series Fibre
Channel Switch Installation Guide.
❑ Open an Internet browser and enter the default IP address 10.0.0.1 to start the QuickTools web applet.
❑ Log in to the switch using the default user name (admin) and password (password).
Step 9. Run the Configuration Wizard
❑ Obtain the IP address and subnet mask from your network administrator.
❑ Open the QuickTools Wizards menu and select Configuration Wizard. Follow the instructions to set network
parameters and the password. The default user name is admin; the default password is password. Changing the
IP address will terminate the QuickTools session.
❑ Open an Internet browser again and enter the new IP address to log in to switch.
Step 10. Connect Devices and Switches
❑ Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port
auto-negotiates the proper port type with the connected device or switch.
Congratulations!
You have successfully installed your QLogic SANbox 5000 Series Switch!