User`s manual

P
r
eli
mi
n
a
ry
Switch Faceplate Display (View>Memory Map)
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A SANsurfer Switch Management
2-71
Switch Faceplate Display (View>Memory Map)
Refer to Figure 2-27. View Memory allows Qlogic support personnel to read and
write selected memory locations in the Switch. If you are experiencing problems, a
support engineer may ask you to perform these operations, display the results, and
send them back to the support facility. Therefore, use this window only under the
direction of QLogic Customer Support personnel or your authorized service
provider.
Entering the Memory Map Window
Display the Memory Map window by choosing View>Memory Map while in the
Switch Faceplate displays.
Figure 2-27 View>Memory Map
Read/Write Increment
Select
Read/Write Select
Memory Data
(in Hex)
Memory Controls