User`s manual

P
r
eli
mi
n
a
ry
Switch Faceplate Display (View>Trace Log)
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A SANsurfer Switch Management
2-69
Switch Faceplate Display (View>Trace Log)
Refer to Figure 2-26. Trace allows Qlogic support personnel to follow the progress
of selected operations as they proceed through the Switch. If, at some point, you
are experiencing problems, a QLogic Support engineer may ask you to perform a
Trace operation, read the results, and send them back to the factory. Therefore, use
this window only under the direction of QLogic Customer Support personnel.
Entering the Trace Controls
You display the Trace Controls by choosing View>Trace Log while in the Switch
Faceplate display.
Figure 2-26 View>Trace Log
Trace control