User`s manual

P
r
eli
mi
n
a
ry
Switch Faceplate Display (Port Display/Loop Devices) (Default)
SANbox-8/16 Switch Management
2-50 SANsurfer Switch Management 59010-06 Rev. A User’s Manual
Switch Faceplate Display (Port Display/Loop Devices) (Default)
The Port Display window displays statistics for the selected port and, if the selected
port is a “loop port” (FL, SL, or TL_Port), the window also displays information
about each device on the loop and allows you to control these devices. Figure 2-16
shows the window as it would appear for a loop port. If the selected port was not a
loop port the application will display only the Switch port statistics portion of the
window.
The Previous and Next buttons will move through active ports on this switch until
the first/last port is reached. When the first/last port has been reached, that button
will no longer function and a warning message is displayed that the port limit has
been reached.
Figure 2-16 Port Display/Loop Devices Window
Switch port statistics
Loop devices (if any) attached
to the selected port
Loop/device controls