User`s manual

P
r
eli
mi
n
a
ry
Switch Faceplate Display (View>Port States) (Default)
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A SANsurfer Switch Management
2-49
Switch Faceplate Display (View>Port States) (Default)
The Port States Faceplate is the default faceplate in the Switch Faceplate display. It
displays icons which represent the kind of GBIC installed in each port on the
selected chassis. Figure 2-15 shows the GBIC icons. If no GBIC is installed in a
particular port, the faceplate shows a blank for that port.
Figure 2-15 GBIC Icons
Double-click on a GBIC icon to jump to the Port Display/Loop Devices window
for that port. Single-click to select a GBIC icon and Zoom to the Port Display/
Loop Devices window (or the TL Configuration window if View>TL Configura-
tion has been selected from the port display faceplate) for that port.
Double-click the Ethernet port icon to jump to the Network Configuration window.
GBIC Icon Colors
While connected to a switch, the GBIC icons for the switch will be color-coded to
represent their status. The status colors are:
• Green — port operation is normal
• Yellow — port being tested
• Red — port is offline or an error exists
• Blue — port is selected for viewing; click zoom button or double click icon
DB9/HSS DC passive Copper (Module definition 1)
Black and White
DB9/HSS DC active Copper (Module definition 2)
(Black and White with a Blue border around the White)
Optical LW single mode (Module definition 3 and 6)
(Blue with Black dots)
Optical OFC
(Black)
Optical SW multimode (Module definition 5 and 7)
(Black with Red and Black dots)