User`s manual

P
r
eli
mi
n
a
ry
Switch Faceplate Display
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A SANsurfer Switch Management
2-43
mation in the Chassis Management portion of the window. The application
displays the Chassis Parameters with all Chassis Management selections.
Ethernet Connector Icon
Double click the icon to go to the Network window.
Main Menu Bar
There are five menus on the Main Menu Bar: File, Edit, View, and Special. These
menus are context-dependent. That is, they each may contain different sub-menus
depending on the window they are in. The Main Menu Bar and all its sub-menus
are the same for all Faceplate window combinations.
File
The File Menu has the same sub menus as the Fabric window (descriptions of these
sub menus can be found on page 2-20):
Edit
The Edit Menu has the following sub menu:
• User Administration — Go to the “User Administration Window” on page 2-
100.
View
The View Menu contains the following sub menus:
• Zoom In — Same as Zoom Button.
• Zoom Out — Same as Back button.
• Performance (Default) —Displays performance data for each active port on
the selected chassis. Refer to “Switch Faceplate Display (View>Port States)
(Default)” on page 2-49.
• Name Service — Displays Name Server data for each active port on the
selected chassis. Refer to “Switch Faceplate Display (View>Name Service)”
on page 2-67.
• Trace Log — Allows you to set-up and run Trace operations on the selected
chassis. Refer to “Switch Faceplate Display (View>Trace Log)” on page 2-
69.
• System Log — Not currently used
• Memory Map — Displays the contents of the switch memory. Refer to
“Switch Faceplate Display (View>Memory Map)” on page 2-71.
• Port States (Default) — Displays the Port States Faceplate. Refer to “Switch
Faceplate Display (View>Port States) (Default)” on page 2-49.