User`s manual

P
r
eli
mi
n
a
ry
Topology Window
SANbox-8/16 Switch Management
2-34 SANsurfer Switch Management 59010-06 Rev. A User’s Manual
9. Click OK and when asked, allow reprogramming of the Switch.
10. Reset the replacement switch.
11. The replacement switch has now been assigned the parameters which had
been in place for the failed switch.
Figure 2-9 Fabric with Failed and Replacement Switches
NOTE:
If the fabric has been configured to use the name server WWN group zoning
method and the replacement switch is in the port group (default value) zoning
method, a dialog box noting a conflict of the selected zoning method between the
replacement switch and the fabric will appear (refer to Figure 2-12). Acknowledge
the warning provided in the dialog box to go to the dialog box for reconfiguring the
zoning method of the replacement switch.