User`s manual

P
r
eli
mi
n
a
ry
Fabric Window
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A SANsurfer Switch Management
2-17
• Place the cursor in the IP Address(es) field and type the IP Address of the
Switch connected via Ethernet (the Web) to the management station.
• Place the cursor in (or tab to) the Rate field and type the desired rate of
checking for errors (whole number values of zero, or greater than 19 are
allowed).
• When the cursor is removed from the Fabric Line after completing the IP
Address(es) a Status Icon will appear.
To delete an existing fabric:
• Select the fabric line on the table.
• Press Delete to remove the existing entry.
Select and View a Fabric
When selecting a fabric, the application will go to the Topology window.
There are three ways to select and view a fabric on the list:
• Double click on the Status Icon, Traps field, or Errors field for the fabric.
• Single click on any field except for the Type field, then press the Zoom
button.
• Single click on the Status Icon, Traps field, or Errors field for the fabric to
select it, then choose View>Zoom.