User`s manual

P
r
eli
mi
n
a
ry
Using SANsurfer
SANbox-8/16 Switch Management
2-4 SANsurfer Switch Management 59010-06 Rev. A User’s Manual
• View the type of GBIC installed in each port on the selected chassis
• View statistics for each port on the selected chassis
• View Address, WWN, FC-4 Type, and Logged-In status of each Loop Device
connected to any port on the selected chassis
• Configure Loop Devices including:
- Place any NL_Port into Loop Bypass Mode
- Place any or all NL_Ports back into normal Loop Mode
- Reset the Loop
- Re-initializing the Loop
• Configure the translation entries list for TL_Ports and control the TL_Port
Auto Learning feature (SANbox only)
• Archive all configurable chassis parameters for all the chassis in a fabric
• Restore all configurable chassis parameters for all chassis in a fabric by
using the archived configuration
• Provide Name Server WWN data fabric-wide.
• Create numerous duplicate user-defined fabrics through use of a template
Using SANsurfer
The SANsurfer application is based on Java 1.1 and operates on Netscape
Navigator 4.5 or newer:
The SANsurfer application operates on the following platforms (management
stations):
• Windows NT
• Solaris 2.7
• Solaris 2.8
SANsurfer can manage multiple chassis within a fabric through a single Ethernet
connection to any one chassis in the fabric. It can also manage multiple fabrics. All
managed Switch chassis must be in the MKII and SANbox families of Switches.
The SANsurfer application is embedded in each SANbox Switch chassis. No
installation is required for operation on NT-based management stations. However,
NOTE:
Macintosh equipment does not support Java 1.1.