User`s manual

P
r
eli
mi
n
a
ry
Configuring the Switch Ethernet Port
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A Introduction
1-7
3. Retrieve the Switch configuration file named config.
4. Use any text editor to modify the parameters of this configuration file.
5. Transfer the configuration file back to the Switch file config.
6. The Switch can now be powered down and moved to the production network.
When the Switch is powered up, it will execute with the new parameter
values defined in the configuration file.
Refer to the TFTP section for more detail.