User`s manual

P
r
eli
mi
n
a
ry
Sequence of Events for Replacing Switch Configuration
SANbox-8/16 Switch Management
4-2 TFTP 59010-06 Rev. A User’s Manual
Sequence of Events for Replacing Switch Configuration
The steps necessary to replace the switch configuration using TFTP are as follows:
1. Retrieve (get) a copy of the index file from the switch. See page 4-3.
2. Retrieve (get) a copy of the config file. See page 4-4.
3. Modify the copy of the config file. See page 4-5.
4. Transfer (put) the copy of the config file on the switch. See page 4-6.
5. Reset the switch to use the new configuration. See page 4-8.