User`s manual

P
r
eli
mi
n
a
ry
show <command type>
SANbox-8/16 Switch Management
3-16 Telnet 59010-06 Rev. A User’s Manual
3 YES
4 NO
5 YES
6 YES
7 YES
8 YES
9 YES
10 YES
11 YES
12 YES
13 YES
14 YES
15 YES
16 YES
portstate [port #]
Display the port state for the port specified. If no port number is specified, the
command returns a display similar to the following:
Returning all ports
num_of_ports = 8
PORT STATUS MODE LOGIN-STATUS AL-ENABLED
01 Offline TL_Port Not logged in YES
02 Offline F_Port Not logged in NO
03 Offline F_Port Not logged in YES
04 Offline TL_Port Not logged in YES
05 Offline F_Port Not logged in YES
06 Offline F_Port Not logged in YES
07 Offline F_Port Not logged in YES
08 Offline F_Port Not logged in YES
scounts
The command returns the number of resets the switch has performed since it was
built. This value is not cleared by any command.
snmp
Retrieve SNMP configuration data. The command returns a display similar to the
following:
Name :<sysName undefined>
Contact :<sysContact undefined>
Location :sysLocation undefined>
Location :sysLocation undefined>