User`s manual

P
r
eli
mi
n
a
ry
show <command type>
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A Telnet
3-15
MON_TEMP_LO (0x3B) :000000FB
MON_FAN_1_LIM (0x3B) :000000F7
MON_FAN_2_LIM (0x3C) :000000F7
nameserver
This command displays a list of all devices logged in with the nameserver.
network <field>
This command can show all or individual network parameters. Available field
values are:
NetAddress
NetMask
Broadcast
Gateway
UseBootp
ArpTimeout (in milliseconds)
When no field value is used, the command returns a display similar to the
following:
IP Address :10.0.1.1
Netmask :255.0.0.0
Broadcast :0.0.0.0
Gateway :0.0.0.0
Bootp Enabled :NO
ARP Timeout (ms) 30000
pagebreak
Displays the current setting of the number of lines displayed before requesting the
user to respond for additional lines of information.
portrscn [port_num]
Displays the RSCN transmission status for one or all ports. To display RSCN
transmission status for all ports, omit the port number [port_num].
100000C0 DD009031>show portrscn 1
Port # Send RSCN
========= ===========
1 NO
100000C0 DD009031>show portrscn
Port # Send RSCN
========= ===========
1 NO
2 YES